Nitex Enterprises, India
Designers & Manufacturers of Bearing Housing
Products | Arvis

Hanger Bearings

Arvis

Split Gunmetal Hanger Bearings

Split Gunmetal Hanger BearingsThe split bronze housing is suspended on a threaded rod which is secured by locknuts. The rod is drilled down the centre and a grease nipple fitted to enable grease to be fed to the journal.

  Technical Dimensions 1/2" to 2 1/4" 20 to 55mm

SG Iron Housing with gunmetal bush Hanger Bearing

SG Iron Housing with gunmetal bush Hanger BearingHeavy duty split SG housing with a split gunmetal bush. (HB L)

The unit comes complete with threaded rod, locknuts and grease nipple. Sealed versions can be supplied and non metallic bushes are avialable to order.

The split shells are replaceable.

Customised versions of these units can be supplied - Specials made to order

  Technical Dimensions 2 1/2" to 3" 60mm to 75mm

Rigid Steel Hanger Units with Split Gunmetal Bearings

Rigid Steel Hanger Units with Split Gunmetal BearingsHeavy duty split steel head with split gunmetal bush. The unit comes supplied with threaded rod, locknuts and grease nipple. Sealed versions can be supplied and various non metallic bushes are availabe to order.

A range of heavy duty hanger bearings can be supplied in steel. For dimensions please see below or alternatively contact our sales department.

Customised versions of these units can be supplied -Specials made to order

  Technical Dimensions